Download Courier V.Everything Internal Modem: Getting Started

DIP
Switch
8
Factory
Setting
ON
9
10
For
More
Info2
Setting
Effect
OFF
ON
Ignore AT commands (dumb mode)
Act on AT commands (smart mode)
Ch 1
OFF
OFF
ON
Disconnect on +++
Don’t disconnect on +++
Ch 2
OFF
OFF
Load the configuration that is stored in
non-volatile memory (NVRAM)*
Load the &F0 configuration from
read-only memory (ROM)*
Ch 4
ON
IMPORTANT: When you power ON or reset the Courier, the
DIP switch settings override the settings you may have made
previously using AT commands.
If you change the DIP switch settings while the Courier is
powered ON, you can avoid powering the Courier off to make
the new settings take effect. Just send the Courier the ATZ
command.
2
For more information, refer to the indicated chapter in the Courier Modems
Command Reference.
Installing the Courier
2-9