1
Download R&S UPP User Manual
Transcript
R&S®UPP Remote Control - Command Description Combi Display SENSe<n1>:REFerence<n2> <reference> Suffix: <n1> . specifies the type of measurement. 1 = function measurement (level / signal to noise / distortion, ...) 2 = input monitor measurement 6 = level monitor measurement Parameters: <reference> float Manual operation: See "Reference" on page 564 SENSe<n1>:REFerence<n2>:MODE<n3> <mode> Suffix: <n1> Parameters: <mode> Manual operation: . specifies the type of measurement. 1 = function measurement (level / signal to noise / distortion, ...) 2 = input monitor measurement 6 = level monitor measurement CH1Meas | CH2Meas | VALue | STORe | SOURce | GENTrack | MREFchannel | CH1Store | CH2Store | CH3Store | CH4Store | CH5Store | CH6Store | CH7Store | CH8Store See "Reference" on page 564 SENSe<n1>:RIGHt<n2> <right> Suffix: <n1> . 1|2|6 <n2> 1|2 Parameters: <right> float Manual operation: See "Right" on page 566 SENSe<n1>:UNAuto<n2> <unauto> Suffix: <n1> . specifies the type of measurement. 1 = function measurement (level / signal to noise / distortion, ...) 2 = input monitor measurement 6 = level monitor measurement Parameters: <unauto> ON | OFF Manual operation: See "Unit Auto" on page 562 User Manual 1411.1055.32 ─ 04 775
