Download Technical manual

INTRODUCTION
The FARTEL PABX’s were designed to improve the use and capacities of telephones. They
are aimed at small and medium-size users and allow for telephone conversations (LD or
DTMF), intercom conversations and intercommunications.
FT105P PABX with 1 external and 5 extension lines
FT208P PABX with 2 external and 8 extension lines
SAFETY RULES
Carefully read the instructions contained in this manual since they supply important
information about safe installation, use and maintenance.
Only use the device for the purpose it was designed for. The manufacturer is not responsible
for possible damages arising from improper, incorrect or unreasonable use.
The device complies with the EEC directives (CE European Mark).
Keep packing components (such as plastic bags, polystyrene foam, etc.) away from
children.
The installation must comply with the CE regulations in force.
A disconnecting and protection switch must be placed before the PABX in the installation.
Before powering up the PABX, make sure that the rating complies with the power mains.
Never open the device when turned on.
In case of failure, malfunctioning or modification of the installation, disconnect the power
mains by means of the general switch and contact specialized staff.
ACI Srl FARFISA Intercoms reserves the right to modify the products illustrated at any time.
The CE mark indicates that the product complies with the 89/336/EEC Directive
on Electromagnetic Compatibility and 73/23/EEC Directive on Low Voltage.