Download Technical manual

FT
105P
PROGRAMMING TABLE
PROGRAMMING
Model FT105P
Access
code
SERVICE
Number to be stored
for each extension
See
page
41 42 43 44 45
T
A
B
E
PROGRAMMING CAN ONLY BE CARRIED OUT FROM EXTENSION 41.
Enables day outgoing phone conversat. 333302
Enables night outgoing phone conversat. 333304
_
_
_
_
_
_
_
_
_
_
6
6
Enables day incoming phone conversat. 333303
Enables night incoming phone conversat. 333305
_
_
_
_
_
_
_
_
_
_
8
8
Enables day incoming calls
Enables night incoming calls
333307
333309
_
_
_
_
_
_
_
_
_
_
9
9
Enables day intercom access
Enables night intercom access
333310
333312
_
_
_
_
_
_
_
_
_
_
40
40
Enables day intercom calls
Enables night intercom calls
333311
333313
_
_
_
_
_
_
_
_
_
_
41
41
Clearing or FLASH time
333314
_
_
_
_
_
12
Enables extension dialling control
Service enabling
333315
333316
_
_
_
_
_
_
_
_
_
_
18
13
SYSTEM PROGRAMMING
Access
code
Number to be stored
LD/DTMF – DTMF tones – Intercom
D.I.S.A.
Enable Caller ID
Overcoming the selective control
External password
1st blocking number for dialling control
8th blocking number for dialling control
1st number enabled
8th number enabled
Returning to the base programming
Programming PABX directory
333317
_ _ _ _ _
L
333318 _ _
333319 _ _
333320 _ _
333322 _ _
333329 _ _
333330 _ _
333337 _ _
333399
222200,...,39
See
page
14
_ _ _
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
Programming allows for personalizing the PABX according to the user’s needs and for
setting the operating mode for the each individual telephone connected to the PABX.
_
_
_
_
_
_
_
_
33
35
44
17
17
16
16
5
34
When turned on, the PABX is programmed for standard use. This programming is defined
as “base” and indicated in each chapter.
Only reprogram the PABX parts that need to be modified and leave the rest unchanged.
If the PABX is connected to a DTMF external line, use telephones with DTMF dialling
and program the external line in DTMF mode, or use telephones with LD dialling and
program the external line in LD mode. If the external line is LD, mixed telephones can be
used, but the line must always be programmed in LD mode.
When programming or operating the PABX, use number 1 instead of the FLASH in case
of LD telephones without such button.
For easier programming, when necessary, press the FLASH instead of hanging up.
Note
The PABX’s are supplied for operation with DTMF over external line. For LD dialling
programming, see page 14.
FT
105P
208P
P
R
O
G
R
A
HOW TO RETURN TO BASE PROGRAMMING
It is possible to return to base programming at any time, by dialling code 333399 from
telephone 41.
This operation restores the base conditions indicated in the manual.
The symbol # in the field indicates that the last number programmed will not be modified
when returning to the base program, such as personal security codes.
The symbol * in the field indicates that the programmed number will be cancelled.
M
M
DAY/NIGHT SERVICE
I
Two operating modes are available, defined as day and night.
To recall the day service, dial 333301 from telephone 41 (operating mode set in the base
programming). To recall the night service, dial 333300.
N
S
G
48
5