Download User Manual

SHND
NAST
changes press the MENU button again. Press and hold the MENU button for one
SH0
second or wait for one minute to go back to the main menu.
SH1
Show Mode
SH2
SH3
Press the MENU button to select
SH4
will blink. Use the DOWN and UP buttons to select the show mode between
SH5
SH6
Menu
and
SH7
SENS
LED
. Once the mode has been selected, press the ENTER button to confirm.
To go back to the functions without any changes press the MENU button again.
SH8
SOUN
. Press the ENTER button and the display
Press and hold the MENU button for one second or wait for one minute to go back
ON
to the main menu.
OFF
0-100
Sound Mode
ON
Press the MENU button to select
OFF
. Press the ENTER button and the display
will blink. Use the DOWN and UP buttons to select the
DISP→DSIP INVERT
(sound on) or
(sound off) mode. Once the mode has been selected, press the ENTER button to
TEST
confirm. To go back to the functions without any changes press the MENU button
HOURS
again. Press and hold the MENU button for one second or wait for one minute to go
VER
back to the main menu.
REST
Sound sensitivity
Press the MENU button to select
. Press the ENTER button and use the
DOWN and UP buttons to select the sound sensitivity (0-100).
DMX Address Setting
Press the MODE button to select
. Press the ENTER button and the display
Led Display
will blink. Use the DOWN and UP buttons to choose the address from 1-512. Once
the address has been selected, press the ENTER button to confirm. To go back to
Press the MENU button to select
. Press the ENTER button and the display
the functions without any changes press the MENU button again. Press and hold
will blink. Use the DOWN and UP buttons to select the
(Led display on) or
(Led display off) mode. Once the mode has been selected, press the ENTER
the MENU button for one second or wait for one minute to go back to the main
button to confirm. To go back to the functions without any changes press the
menu.
MENU button again. Press and hold the MENU button for one second or wait for
one minute to go back to the main menu.
Slave Mode
Press the MENU button to select
. Press the ENTER button and the display
will blink. Use the DOWN and UP buttons to select the
Display Inversion
(normal) or
(2 light show) or
for master mode. Once the mode has been selected,
press the ENTER button to confirm. To go back to the functions without any
Press the MENU button to select
mode
. Press the ENTER button to change to the
(display normal), It will be automatically saved after 8 seconds. Press