Download Manual dryer controller HW100 SW100 MR100

9) Setting up a new controller
Controllers are delivered with battery, but in most cases the battery will not be placed into the holder.
This is done to save battery energy when the controller is kept on stock.
Because the dryer was shipped without a battery installed the battery backed-up memory will be gone.
This means that the program counters, counters per day, and the total counters will be 0.
Also the time and date settings will be lost (and set to a default value). Set the date and time to the
correct value as described in chapter 6.6.1.
All machine configurations will be at the default value when the dryer is shipped. So, the machine
configurations also have to be set according to the type of dryer and the available options.
The controller will start up in the default language, which is English. If necessary the desired interface
language can be changed as described in chapter 6.6.2.
Manual M720 Dryer controller
HW 1.00, SW 1.00
Manual revision 1.00
Page 42 of 42