Download ATi user manual master

AT SERIES SERVER
4.2.5 GROUPING TEST PROGRAMS
Programs that are used on the transformer tester at similar times may be
grouped for convenience. For example, a number of transformers all based on
the same bobbin may be tested at the same time.
When a program group has been defined it may be downloaded to the tester.
Each of the parts within the group will then be available for ‘local’ use. The
parts will be stored in non-volatile RAM. No programs are lost after powerdown.
The following dialogue is used to configure groups and may be located under
the Setup menu in the Server:
Double-clicking on any part in the left hand list will add it to the right hand,
grouped list.
When you have completed editing a group you will see it added to the
available group list. To transfer the group to the tester it must be requested by
the tester. See Chapter 2 of the manual for details.
i
IMPORTANT: The group function does not store a new copy of
each part when a group is defined. Only reference is made to
the part being in a group. DO NOT delete a part after including
it in a group other wise the part will be lost, and the group
rendered invalid.
PAGE 4-10
VOLTECH ATI USER MANUAL