Download FX3U-ENET-L USER`S MANUAL

Transcript
9
WHEN COMMUNICATING DATA USING THE MC PROTOCOL
MELSEC-F
POINT
• When executing the remote RUN/STOP using other external devices or
computer link, the remote RUN/STOP is executed in the order of execution.
• When the power of PLC is turned on, then off, and then on again with the
remote RUN/STOP executed, the remote RUN/STOP status is canceled and
the setting of the PLC's RUN/STOP switch becomes valid.
9 - 37
9 - 37