Download DIGORA Optime

3 Advanced use
The Start delay options allow the start delay time to be
selected.
•
Short = approximately 0.2 seconds
•
Medium = approximately 0.4 seconds
(recommended default)
•
Long = approximately 0.6 seconds
Select Manual if you want processing to start only when
the START key is pressed.
Note! Processing starts even if the plate is:
•
Wrong way round
•
Not detected
•
Not inserted at all
Note! Unit turns off in manual mode if user is pressing ON/
OFF key regardless of imaging plate sensing in the plate
carrier.
3.3.2
Touchless operation
Note! This system does not support touchless operation.
208396 rev 2
SOREDEX
15