Download DIGORA Optime

8 Other information
8
Other information
8.1 Quality control
To ensure maximum system performance
1.
2.
Observe IQO (Image Quality Optimizer) indication on
the application SW to see that the x-ray settings are optimal.
Perform self quality control regularly according instructions provided with quality control test set SP00204
(SDX Intra digi QC IEC phantom w. instructions).
8.2 Device care
WARNING!
Switch the unit off and disconnect it from the main power
supply before cleaning or disinfecting the unit. Do not allow
liquids to enter the unit.
8.3 Device cleaning
To clean the unit use a non abrasive cloth moistened with:
•
cool or lukewarm water
•
soapy water
•
mild detergent
•
isopropyl alcohol
•
or ethanol (ethyl alcohol) 70 - 96%
•
Optiwipe™
•
CaviCide®, CaviWipes® by Metrex
•
FD322 by Dürr Dental
•
Easydes by Kiilto
After cleaning wipe the unit with a non abrasive cloth
moistened with water. Never use solvents or abrasive
cleaners to clean the unit. Never use unfamiliar or untested
cleaning agents. If you are not sure what the cleaning
agent contains, DO NOT use it.
If you use a spray cleaning agent DO NOT spray it directly
into the unit door.
208396 rev 2
SOREDEX
45