1
Download Managed Switch Software User Manual
Transcript
Alarm (OK) Output 4.9 Alarm (OK) Output These settings control the events that will trigger the alarm output. The OK discrete output is on during normal conditions and turned off in the event of an alarm condition. 4.9.1 Both Power Inputs On An alarm condition will be triggered if power is not on for both power inputs. 4.9.2 Ring Failure An alarm condition will be triggered when a ring failure occurs. Ring failure on a local port will be triggered when one of this switch's neighbors in the ring goes down; the general ring failure option will be triggered when any switch in the ring goes down. The general ring failure option implies that local ring port failure is also detected. 4.9.3 Ports Linked An alarm condition will be triggered whenever any of the selected ports are not linked. 36 Sixnet, LLC
