Download AN-X-DCSNet User Manual - Quest Technical Solutions

AN-X-DCSNet Page 59
The contents of the right pane depend on the current command being
executed.
DCSNet Configuration
Select Automation Network/DCSNet Configuration to set the DCS drop
number and depth.
AN-X-DCSNet can be used as a DCS master or slave. Check Master or
Slave to select which one you want.
If the AN-X-DCSNet is a DCS slave, enter the Drop Number and Drop
Depth. These entries are ignored if the AN-X is a DCS master.
The default AN-X configuration is DCS slave, drop 55, depth 1.
Click the SUBMIT button to send the values to AN-X.
If you are using ControlLogix Support or AN-X to AN-X
communication, check the logs for these applications since the new DCS
parameters may be incompatible with the current configurations for these
applications.
January 2008