Download An-ea-004 - AutomationDirect Technical Support

THIS INFORMATION PROVIDED BY AUTOMATIONDIRECT.COM TECHNICAL SUPPORT
IS PROVIDED "AS IS" WITHOUT A GUARANTEE OF ANY KIND.
These documents are provided by our technical support department to assist others. We do not guarantee
that the data is suitable for your particular application, nor do we assume any responsibility for them in
your application.
on the same network but the performance is much less than EtherNet/IP. DH485 is not as robust
as DF1 or EtherNet/IP.
2. Supported Data Types for SLC, MicroLogix and PLC5.
a. Compatible Data Type Chart
I = Input
O = Output
S = Status
B = Binary
T = Timer
C = Counter
R = Control
N = Integer
F = Float
**L = Long
**ST = String
SLC
*X
*X
X
X
X
X
X
X
X
X
MicroLogix
X
X
X
X
X
X
X
X
X
X
X
PLC5
X
X
X
X
X
X
X
X
X
* I/O access not supported for SLC5/01 and 5/02
** NOTE: As of version 2.10, Long and String data types were not yet supported. They should
be available by Q3, 2008. Refer to the release notes of the C-more software on our website to
see when these data types are supported.
b. Syntax for entering SLC, MicroLogix and PLC5 addressing
into C-more programming software.
Syntax for Integer data type, file 7, word 0 (N7:0).
Page 3 of 33