Download Down - Instrotech Ltd

symbol:
Meaning of the
WARNING! Please refer to the User’s Manual before using the instrument.
In this User’s Manual, instructions preceded by the symbol above, should they not be carried out as
shown, can result in a physical accident or damage to the instrument and installations.
Meaning of the
symbol:
This instrument is protected by double or reinforced insulation. It does not require connection to the
protective conductor terminal to ensure electrical safety.
Thank you for purchasing a C.A 6115N Installation Tester.
To get the best service from this instrument:
n read this user’s manual carefully,
n respect the safety precautions detailed.
SAFETY PRECAUTIONS
■ Do not splash or immerse the C.A 6115N tester in water under any circumstances.
■ This instrument may be used on category III installations for voltages not exceeding 300 V in relation
to earth. Category III meets with strict reliability and environmental requisites corresponding to
permanent use on fixed industrial installations (see IEC 664-1).
■ Do not use the C.A 6115N tester on installations exceeding 300 V in relation to earth.
■ Use connection accessories of overvoltage category and service voltage greater than, or equal to,
the measurement instrument (300 V Cat III). Only use accessories that comply with safety standards
(EN 61010-2-032).
■ If a fuse should blow, please follow the instructions detailed in this brochure to replace it!
■ All repairs and metrological checks must be carried out by qualified and approved personnel!
WARRANTY
Our guarantee is applicable for twelve months after the date on which the equipment is made available
(extract from our General Conditions of Sale, available on request).
2