Download This is a WIFI camera which need to work - image

This is a WIFI camera which need to work together with smart phone, it could be used to
monitor in local network or internet both, the adaptive sites are family, shop ,etc.
Two working mode:
(1) AP mode: the device(sunflower camera) will be a WIFI hotspot, smart phone could connect
with device.
(2) Station mode: the device connect with a router, smart phone could visit device by router or
internet. (Diagram)
Diagram
Installing STEPS:
Step 1: Please go to the Appstore or Android Market search "macroSEE" to download
Set the switch button (diagram 1) to AP mode. (Valid distance: indoor 15 to 30 meters,
outdoor 50 to 100 meters);LED will flash, please wait till it off, open “WIFI
configuration” of your smart phone, search the device name like “MV231975” (diagram
2), to connect with the WIFI device.
(Diagram 1)
(Diagram 2)
Step2: AP mode connecting:
Click “APP” button in software could search device automatically, details as below:
2.1 Auto search
Click “APP” button (or dropdown screen), device list will show device, click the right
device （Diagram 3)
2.2 Manually add device
Click “Add” button to fulfill: Name；device ID；device address :192.168.1.1 ；port is
default(no need change)；user name(default):admin；password(default):
；Click “Save”
to save setting. Then you could see the device in device list. (Diagram 4)
(Diagram 3)
(Diagram 4)
Step 3: Station mode connecting:
The mode allows your Smartphone to monitor from remote site by internet, or
monitor in local network by LAN router.
This is configuration under the step 2 succeeded, click ”configuration button”(diagram 5),
choose “station mode” (diagram 6), click “WIFI mode” and choose a WIFI connected
with internet(diagram 7), click “save” button, it will jump out “configuration success”,
click “ok” to back. Switch device mode to “station mode” (diagram 8), red and green
LED will be ON, device status is “Station mode” now, open your smart phone WIFI
configuration and choose the WIFI the same as the device connected just now.(diagram 9)
“search device” or “add device”(refer to 2.1 and 2.2), click the right device to monitor
video and voice(diagram10).
(Diagram 5)
(Diagram 7)
(Diagram 9)
(Diagram 6)
(Diagram 8)
(Diagram 10)
Software functions:
1.
General info: general information of the device, such as name, user name, password (port and IP are default,
please do not change)
2.
Network setting:
AP mode: smart phone and device connect by point to point.
Station mode: it allows device to connect with internet by router, remote monitoring from internet is able.
3.
User management: For revising device user name, password (after changed , please also change it in “general
info” item)