Download HP StorageWorks HSG60 and HSG80 Array Controller

Utilities and Exercisers
Table 14: Disk Device Information (Sheet 4 of 4)
Info Displayed
Metadata Version/SC
Description
Disk Container Metadata Version and Status of
SAVE_CONFIGURATION.
If a disk drive is introduced to a controller, and it is not initialized in
Transparent Failover mode (refer to CLI reference guide), it is
assigned a metadata version number. The disk drive keeps its
assigned metadata version number until it is re-initialized with a
version of ACS that implements a different version number.
Example of output:
Metadata
vers/SC
-------11/*
* SC status (I, U, N, D)
The SC status field is a value that indicates the
SAVE_CONFIGURATION status on the Device (refer to CLI reference
guide). The returned values are described below:
■
Ignored—The configuration data is not being used nor updated
for the following reasons:
— The last initialization was previously initialized by an older
version of ACS with the SAVE_CONFIGURATION command.
— Incorrect version of the device metadata under which the
SAVE_CONFIGURATION command was invoked in addition
to the firmware. The version for the metadata is indicated as
<11.
■
Used—The device is currently being used as a repository of
configuration information because it was initialized with the
SAVE_CONFIGURATION command under a version of ACS that is
compatible with V8.8 firmware. The metadata version is 11.
■
Not Present—The device is not initialized or is initialized without
the SAVE_CONFIGURATION command.
■
Disabled—The device SAVE_CONFIGURATION space has been
disabled by the REINITIALIZE raidset TURNSAVEOFF
command.
HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
83