Download HP StorageWorks HSG60 and HSG80 Array Controller

Last Failure Codes
Table 56: Last Failure Codes and Repair Action Codes (Sheet 48 of 55)
Last
Failure
Code
Description
Repair
Action
Code
201B0100
Insufficient resources to get memory to lock CLI.
201C0100
Changes to unlock.
20200100
CLI$ALLOCATE_STRUCT( ) could not obtain memory for a new
NVFOC_RW_REMOTE_NVMEM structure.
01
20220020
This controller requested this subsystem to power off.
00
20230000
A restart of both controllers is required after exiting Multibus Failover
mode.
01
00
20260000
With “SET FAILOVER COPY=OTHER,” the controller to which the
configuration is copied is automatically restarted by this bugcheck.
00
20640000
Nindy was turned on.
00
20650000
Changes to off.
20692010
To enter Dual-redundant mode, both controllers must be of the same
type.
20
206A0000
Controller restart forced by DEBUG CRASH REBOOT command.
00
206B0010
Changes to DEBUG CRASH NOREBOOT.
206C0020
Controller was forced to restart in order for new controller code image to
take effect.
00
206D0000
Controller code load was not completed because the controller could not
rundown all units.
00
206E0000
A restart of both controllers is required after entering Multiple-bus
Failover and the last Failover mode of the source controller was
Transparent, or after entering Transparent Failover and the last Failover
mode of the source controller was Multipl-bus.
00
43000100
Encountered an unexpected structure type on HP_WORK_Q.
01
43030100
Unable to allocate the necessary number of large sense data buckets in
HPP_INIT( ).
01
43100100
Encountered a NULL completion routine pointer in a DD.
01
43130100
Could not allocate a large sense bucket.
01
43160100
A sense data bucket of unknown type (neither large nor small) was
passed to DEALLOCATE_SDB( ).
01
HSG60 and HSG80 Array Controller and Array Controller Software Troubleshooting Guide
261