Download "user manual"

7022
DESCRIPTION: F26-03 displayed at power up and unable to perform L-detect.
SOLUTION: CAUSE: Worn developer.
SOLUTION ID: 166881
USAGE: 1
SOLUTION: Replace the developer (PCUA 950254).
DESCRIPTION: FK102, how many one-touch numbers can be programmed?
SOLUTION: The FK102 can store up to 40 one-touch numbers. Additional another 200 numbers can be stored
using the ABBR one-touch feature.
SOLUTION ID: 168217
USAGE: 1
SOLUTION ID: 168224
DESCRIPTION: Intermittently 46-11 occurs during copy mode.
SOLUTION: CAUSE: The scanner motor (M2) failed.
USAGE: 1
SOLUTION: The scanner motor may power ON in 47 mode, however when it gets warm it may fail.
Replace the M2 scanner motor (p/n 26NA80022) as needed.
DESCRIPTION: DB209, the gears do not align after installing the parts from DB209/210/409/410 Technical
Bulletin #1, Gear Skipping - J16 Jams.
SOLUTION: CAUSE: The parts are for the DB410 only.
SOLUTION ID: 168546
USAGE: 1
SOLUTION: The parts can only be used with a DB410.
Notes:
1. See [[DB410 Technical Bulletin #1| URL
http://techweb.konicabt.com/tpm/media/db410tb01.pdf]]) for details.
2. To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for
free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL
http://www.adobe.com/products/acrobat/readstep2.html]]
*[[Trademark ownership information| FILE V:\TEXT\TRADEMRK.TXT NEW]]
DESCRIPTION: FK102, When Communications Journal is set to Daily, can the print time (9:00am) be
changed?
SOLUTION: This is a set time and can not be changed.
SOLUTION ID: 168815
USAGE: 1
DESCRIPTION: Background on copies (more pronounced on the 2nd side).
SOLUTION: CAUSE: Insufficient drum ground.
SOLUTION ID: 169306
USAGE: 1
SOLUTION: Remove the Drum carriage from the machine. Remove the Drum shaft and the Drum
bearing. Thoroughly clean the Drum bearing and shaft of any foreign material. Replace the Drum
bearing as necessary (p/n 26NA20480).
SOLUTION ID: 169700
DESCRIPTION: Intermittent 41-01 codes occur in the morning.
SOLUTION: CAUSE: The DCPS has failed.
USAGE: 1
SOLUTION: Replace the DCPS (p/n 26NA84511).
DESCRIPTION: E89-01 codes intermittently. Main CB internal communication error.
SOLUTION: CAUSE: System control firmware problem.
SOLUTION ID: 170018
USAGE: 1
SOLUTION: Upgrade system control firmware to level 16.
Note: The latest firmware is available at [[http://www.konicabt.com/konicode/PubBrowser/eproms|
URL http://www.konicabt.com/konicode/PubBrowser/eproms]].
DESCRIPTION: Only on the third copy, one inch of print would appear in the center of the copy.
SOLUTION: CAUSE: The machine memory has failed.
SOLUTION ID: 170794
USAGE: 1
SOLUTION: Power the machine OFF using both power switches and then unplug the machine for
1 minute. Power the machine ON and make test copies.
DESCRIPTION: Some PM kits (Item #950256) for the 7022 and 7130 may contain the wrong upper fuser
roller.
Copyright 2005, Konica Minolta Business Solutions U.S.A., Inc.
SOLUTION ID: 171152
May 2005
40