1
Download 1. Installation
Transcript
8. Macro C. ON/OFF Macro Commands：There are two ON/OFF macro commands in push-button object. 1. ON Macro：ON Macro is executed when the button is clicked and set a bit to be ON. The common use for ON Macro is the action of push-button, the control of chain process or the effect of displaying the initial screen and PLC register and bit initilialization…etc. 2. OFF Macro：OFF Macro is executed when the button is clicked and released a bit to be OFF. Then the HMI will execute the Macro commands once. The common use for HMI is the action of push-button, the control of sequence process, the effect of displaying the close screen…etc. D. Sub-Macro Commands：A user can select [Sub-Macro] from the [Object] menu. 1. Sub-Macro ： It is the sub-command of Macro. Sub-Macro is executed by the HMI with CALL command. The common use for Sub-Macro is to edit and save some basic functions or arithmetic commands for Macro. 374 ADP User’s Manual
