1
Download PEF 82902 - Digi-Key
Transcript
PEF 82902 Appendix: Differences between Q- and T-SMINT‚I • AWR U0 IOM Awaked DC TIM AR DI U0 Deactivated DC U0, DA AWR AR T6S T05E U1W Start Awaking Uk0 RSY T6S T05S T05S U0 Deactivating DC AWR AWT T6S T6E U0 Awake Signal Sent RSY AWR T13S T13E U0 Ack. Sent / Received AWT AWR T13S RSY U1W Sending Awake-Ack. RSY T13S (DI & T05E) T12S U1A Synchronizing RSY (U0 & T12E) U2 T05S U0 Pend. Deactivation DR DI DR T05S SSP or LTD DT U1 SBC Synchronizing AR / ARL U0 LOF ANY STATE RES AI U3 Wait for Info U4H AR / ARL SP / U0 Test DI U0 Reset DR U0 LOF U4H U0 U5 Transparent AI / AIL Figure 76 U0 LOF U0 Loss of Framing RSY NT_SM_4B3T_cust.emf IEC-T/NTC-T Compatible State Machine T-SMINTâI: 4B3T Both the Q- and the T-SMINTâI U-transceiver can be controlled via state machines, which are compatible to those defined for the old NT generation INTC-Q and NTC-T. Additionally, the Q-SMINTâI possesses a newly defined, so called ‘simplified‘ state machine. This simplified state machine can be used optionally instead of the INTC-Q compatible state machine and eases the U-transceiver control by software. Such a simplified state machine is not available for the T-SMINTâI. Data Sheet 183 2001-11-09
