Download User Manual

Step 10 :
After pairing is done, right click on
device name Serial Adapter, then
click on Connect RS232 cable
replacement.
A connection between local PC
Bluetooth Dongle and remote BT0240 Adapter will be built.
An icon
will be displayed to
inform you that a successful connection has been created, and Bluetooth
LED on remote BT-0240 Adapter will
light.
Step 11 :
Click My Bluetooth Places, Widcomm
driver will inform you that a virtual
COM port (COM3 in this case) is used
by your PC (USB Bluetooth Dongle) to
communicate with the remote BT0240 RS232 Adapter.
Press OK.
Step 12 :
Serial Adapter is paired and
connected.
18