Download Reid-7 program. User manual

Program Reid-7 allows to copy reflektogramplots from one document in another. By pressing
the button
of the toolbar the program displays
dialog (Fig. 5.7) in which you can choose those
documents (opened) from which it is necessary to
copy reflectograms.
By pressing on "Ok" all will be copied
reference and additional reflectograms from the
chosen documents. They will be placed in a
category additional the current document.
Fig. 5.7 Dialog of adding reflectograms
From all array of open documents for copying in the active approach not everything, but only
satisfying to certain conditions. Only these documents will get to the list and can be added to a working
document. These conditions the following:
 The type of the device of both documents should be identical.
 The method of measurements of both devices should be identical.
 The range of both documents should be identical.
 The coefficient of shortening of both documents should be identical.
 The scale of both documents should be identical.
 The amplification of both documents should be identical.
 The initial coordinate of measurements should match at both documents.
 The quantity of samples on all range should be identical.
To check parametres it is possible in the field of parametres being on the right.
Reid-7 program (version 1.08.2) User manual
21