Download - infoPLC

Configuration
with Unilink
Contd.
6
As the changes made are
fundamental settings for the
amplifier, the data must first be
saved and the amplifier reset.
7
The connection is lost during the
reset.
To continue with parameterization, you will need to
reconnect.
8
Once communication has been
resumed, click on Disable again
to activate the input of basic
settings.
Then click on Basic Setup.
9
In the Basic Setup screen,
settings must/can be made in
the fields with a white
background.
Under "max. Mains Voltage"
(blue), you should select the
max. line voltage (in this case
400 V). The response of the
servo to a power supply failure
("Mains Phase missing") can
also be selected here (in this
case Warning).
Continued on next page
Premium Lexium Altivar Sercos_EN.doc
Schneider Electric
62