Download Security Escort 2.15 Training Manual

134
en | Troubleshooting transponders, points, receivers, and alert units
Security Escort
Different paging companies and they may require different baud rates. Set the baud rate to
the highest baud rate common to all of the paging companies to be accessed.
The Character limit (characters per page), Pages per call affect all pages of the indicated type
(local and dial-up). These fields must be set to the lowest setting for any of the routes that
may be used. Remember that dial-up pages may be routed to different paging companies and
they may have different restrictions.
7.10.6
Subscriber (individual) Pager Setup
In the Subscriber Database select the record for the desired individual. Click the [Edit Data]
button, followed by the [Advanced] button. The dialog below will be displayed.
Figure 7.14: Subscriber Database Advanced Dialog
The pager ID is required for all individual pagers dial-up and local. If the phone number and
password are assigned the page will be sent over the modem connection. If the phone number
and password fields are blank the page will be routed to the local paging system. If you do not
desire this individual to have pager support leave the phone number, password and pager ID
fields all blank.
2015.05 | V2.15.0 | DOC
Training Manual
Robert Bosch (SEA) Pte Ltd