Download DAS-8000
Transcript
DAS-8000 ver. 2.5 Change of General Password The next section of the Configuration Menu is the modification of the Access Password (PASSWORD). On the upper display the last password configured will be displayed, and on the lower one the message PASS. Press the Increment and Shift keys to enter the new password. 0001 p a s s Last configurated PASSWORD PassWord symbol The access password allows the use of 10 digits, 0 to 9, and the letters A, B, C, D, E and F, in any combination. After modifying the password, press the Validation key to confirm it or the Function key to leave without saving it. NOTES: • The change of Password should be done associating it with some number or word that is easy to remember, since you will use it to enter the Configuration Menu very frequently. • If on the contrary, it is not going to be used for a long time, it is advisable to write it in the Manual in case you need it in the future. • If you do forget your password, a procedure exists for returning to the factory Password, that is not explained here, but can ask the supplier of the DAS-8000 about the procedure. Configuration / 128