Download FRYCORDER Power Cord Burn-in Generator
Transcript
FRYCORDER Power Cord Burn-in Generator Made in USA FRYCORDER Power Cord Burn-in Generator 2 Copyrights & Trademarks © Copyright Hagerman Audio Labs 2012. All rights reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent. FryKleanerTM and FryCorderTM are trademarks of Hagerman Technology LLC. Disclaimer The information contained in this document is subject to change without notice. Hagerman Audio Labs shall not be liable for errors contained herein or for consequential damages in connection with the furnishing, performance, or use of this material. Warranty Hagerman Audio Labs warrants this product free of defects in materials and workmanship for a period of 10 years. If you discover a defect, Hagerman Audio Labs will, at its option, repair or replace the product at no charge to you provided you return it during the warranty period, transportation charges prepaid to Hagerman Audio Labs. This warranty does not apply if the product has been damaged by negligence, accident, abuse or misuse or misapplication, has been damaged because it has been improperly connected to other equipment or has been modified without the express written permission of Hagerman Audio Labs. This warranty is limited to the replacement or repair of this product and not to damage to equipment of other manufacturers. Any applicable implied warranties, including warranty of merchantability, are limited in duration to a period of the express warranty as provided herein beginning with the original date of purchase and no warranties, whether express or implied shall apply to the product thereafter. Under no circumstances shall Hagerman Audio Labs be liable for any loss, direct, indirect, incidental, special, or consequential damage arising out of or in connection with the use of this product. Hagerman Audio Labs PO Box 61911 Honolulu, HI 96839 808-383-2704 www.haglabs.com FRYCORDER Power Cord Burn-in Generator 3 Description The FryCorder is a burn-in signal generator designed specifically for audio equipment power cords and room wiring. Just plug the unit into the wall and it immediately sends the sophisticated burn-in signal (a combination of wideband noise and random amplitude modulation) into the wiring. FryCorder is part of the FryKleanerTM series of professional cable burn-in generators. Specifications Item Output Power Signal Bandwidth AC Voltage Specification 1W peak (both Line and Neutral) 1kHz to 100kHz 120Vac 60Hz or 240Vac 50Hz FRYCORDER Power Cord Burn-in Generator 4 Operation To burn-in a power cord, just plug into the FryCorder and then into a power outlet. It is that simple. The FryCorder circuit immediately starts up and sends the signal into the power cord and house wiring. A red LED inside the case will blink indicating proper operation. The burn-in signal travels through the power wiring until it reaches the utility transformer, which does not have enough bandwidth to pass the signal. Depending on the loading and impedance of the AC wiring, the signal will be a combination of currents at the lower frequencies and voltages at the higher. This method of power delivery is most effective for the break-in of both conductors and insulators, resulting in a better and quieter delivery of power to your audio equipment. Duration Empirical testing has led to the conclusion that most wiring achieves break-in after two or three days of continuous burn. Silver conductors seem to take twice as long as copper. FRYCORDER Power Cord Burn-in Generator Troubleshooting In case of trouble, please contact [email protected]. Problem LED does not light up. Solution Attach power cord, plug into AC outlet. 5 FRYCORDER Power Cord Burn-in Generator 6 J1 1 2 3 A B This document contains proprietary information and except with written permission of Hagerman Technology LLC such information shall not be published, or disclosed to others, or used for any purpose, and the document shall not be copied in whole or in part. Copyright Hagerman Technology LLC 2009. All rights reserved. AC 1 2 3 F1 PTC R1 1R0 POS F2 PTC NEG C R2 1R0 R3 1R0 T1 POWER 10V 10V D MBR1100 D2 MBR1100 D1 C1 1000uF 25V E C2 1000uF 25V 15V E Date: Size F Monday, October 05, 2009 n/a Document Number Sheet FryCorder: Power SUpply Title P.O. Box 61911 Honolulu, HI 96839 Hagerman Technology F 1 G G of 2 Rev A 1 2 3 4 D 4 C 5 B 5 A 1 2 3 4 5 Q2 2N3904 100nF C13 R23 47k 47k R18 3 2 100k R12 5 6 U1B LM2904 7 4 8 R28 100k 10k C15 47uF 25V 3 2 4 100k R5 A R8 47k C19 100nF B 9V 10k R30 6 11 1 R24 22k 15V Q1 2N3904 5 4 7 C C C17 47uF 25V 14 15 13 8 U2B LM2904 7 15V 8 U5A LM13700 100k R16 R9 100k 5 6 100nF 100k 15V R21 R27 100k U1A LM2904 1 15V 4 8 15V C3 R4 B This document contains proprietary information and except with written permission of Hagerman Technology LLC such information shall not be published, or disclosed to others, or used for any purpose, and the document shall not be copied in whole or in part. Copyright Hagerman Technology LLC 2009. All rights reserved. C11 47uF 25V R19 100k R17 100k 15V C7 47uF 25V A 10k R31 6 11 15V 16 R14 100k R10 100k 15V 12 4 10 C18 100pF U5B LM13700 100k R13 3 2 9 D5 LED R15 4k7 D U2A LM2904 1 15V 8 D 100nF C16 R29 10k R25 22k 1M R22 1M R7 E E C12 47uF 25V C6 47uF 25V 7 1 8 3 2 7 1 8 3 2 5 U4 LM386 5 U3 LM386 C14 100nF R26 100 D4 MBR1100 D7 MBR1100 1uF C10 D6 MBR1100 +15V C8 100nF R11 100 1uF C5 D3 MBR1100 +15V P.O. Box 61911 Honolulu, HI 96839 Hagerman Technology 100 R20 100 R6 Date: Size F Monday, October 05, 2009 n/a Document Number Sheet 2 G G NEG POS FryCorder: Waveform Generator Title 4 6 4 6 F of 2 A Rev 1 2 3 4 5