Download AFC Manager User Manual

AFC Manager ♦ Configuration Tool
Automatic Flow Computer
Reference
Densitometer calibration parameter 10 (K21a)
The named parameter from the manufacturer's densitometer calibration sheet,
where applicable to the selected densitometer type.
Densitometer calibration parameter 11 (K21b)
The named parameter from the manufacturer's densitometer calibration sheet,
where applicable to the selected densitometer type.
Densitometer calibration parameter 12
The named parameter from the manufacturer's densitometer calibration sheet,
where applicable to the selected densitometer type.
Densitometer calibration parameter 13
The named parameter from the manufacturer's densitometer calibration sheet,
where applicable to the selected densitometer type.
Densitometer calibration parameter 14
The named parameter from the manufacturer's densitometer calibration sheet,
where applicable to the selected densitometer type.
Open archive record select (age), daily
Enter the age of the desired daily archive record (1 through oldest) into this point
and immediately read the selected record from the associated window. Click the
"Addresses" button in the "Archive Configuration" window for more information.
Open archive record select (age), hourly
Enter the age of the desired hourly archive record (1 through oldest) into this
point and immediately read the selected record from the associated window.
Click the "Addresses" button in the "Archive Configuration" window for more
information.
Checksum alarms
Checksum alarms detected for this meter. For more information, view bit-level
detail and refer to the site signal "Clear all checksum alarms" (register 200 bit 1).
Checksum alarm: Meter configuration
During power-up the checksum for the non-volatile memory containing the meter
configuration did not verify. For more information, refer to the site signal "Clear all
checksum alarms" (register 200 bit 1).
Page 210 of 290
ProSoft Technology, Inc.
November 26, 2007