Download Software Manual - User manual for DriveWare ® 5.4.2

Connecting to the Drive / Saving the Drive’s Default Configuration
Saving the Drive’s Default Configuration
When you connect, the setup software reads the configuration settings from the
drive and that data becomes the current project. Now would be a good time to
save these settings to your computer using a unique name to identify these
factory-set drive parameters. If you need to review, see “Saving the Project File
onto Your Computer” on page 14.
Changing Communication Parameters
Once communication is established, you may change the address and baud
rate settings.
1. Choose one of the following actions:
—
Select Drive > Connection Settings on the main menu bar.
—
Click on the Connect icon
on the tool bar.
2. Choose your desired settings.
3. Click the OK button.
Connection Settings Window
The new settings take effect immediately. In order to retain the new settings upon
power-up, they must be stored in the drive’s nonvolatile memory. If you need to
review, see “Storing the Changes onto the Drive” on page 14.
20
MNDGDWUG-03