Download IMS16C User Manual v1.11

IMS16C Embedded Microprocessor
HDLC1 Interrupt
User’s Manual V1.11
18h
60h
16
Figure 8.1 IMS16C Interrupt Types
NOTES:
Default priorities for interrupt sources are used only if the user does not program each source to a unique priority level.
1. Generated as a result of an instruction execution.
2. Performed in the same manner as the 80C186.
3. All three timers make up a single interrupt request from the interrupt controller. Because of this they share the same priority
level. However, each timers has a defined priority with respect to each other. Priority level 2A is the highest, then 2B, followed
by 2C.
Last Updated 2003-02-11
51 / 143