Download Model 42i - User Manual

Operation
Instrument Controls Menu
Decimal Places
The Decimal Places screen allows the user to select how many digits are
displayed to the right of the decimal, from 0 to 6, with a default of 2.
●
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel > Decimal Places.
DECIMAL PLACES:
CURRENTLY:
SET TO:
2
3 ?
©ª CHANGE VALUE
ƒ SAVE VALUE
RANGE
Number of Table Points
AVG
DIAGS ALARM
The Number of Table Points screen allows the user to select how many
points are used in the conversion table. The points range from 2 to 10,
with a default of 2.
●
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel > Table Points.
NUMBER OF TABLE POINTS:
CURRENTLY:
2
SET TO:
10 ?
©ª CHANGE VALUE
ƒ SAVE VALUE
RANGE
Table Point
DIAGS ALARM
The Table Point submenu allows the user to set up an individual table
point.
●
Thermo Fisher Scientific
AVG
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel > Point 1-10.
Model 42i Instruction Manual
3-53