Download Introduction and Overview Guide
Transcript
tax/transfer system as currently legislated, let us call it Scenario 1. The second scenario has the exact same tax/transfer system with the exception that the maximum amount of Old Age Security is set to $6000. Let us call this second scenario Scenario 2. This could be done by performing two separate program runs and then comparing the outputs from the runs to determine the impact. However the SPSM is capable of performing the comparison in a single program execution. This is accomplished by applying the simulation algorithms to a given household twice in the same program run but with different parameter files. One such application is called the base and produces "base" results while the second application is called the variant and produces "variant" results. The first run, Scenario 1, would be calculated using the base set of parameters while Scenario 2 would be calculated using the variant parameters. The results of any single simulation scenario are derived by a series of functions which sequentially calculate certain taxes and cash transfers as required by the tax/transfer system. For example, old age security benefits must be known before calculating net income. The sequence of these functions is controlled by a program called the driver (drv). The following figure represents the standard algorithm driver. Changes to the standard (or alternate) algorithm driver can be made in glass box mode. The following figure shows the structure of the standard tax/transfer algorithm driver in more detail. EI, OAS, FA EI, OAS, FA Adjust Database Calculate Base Scenario Calculate Variant Scenario Calculate User Variables Selection and Output Routines GIS, SPA Federal Taxes Refundable Tax Credits Provincial Taxes Commodity Taxes Reporting Variables SPSD Database SPSM Parameters SPSM Simulator (Black Box) Table Outputs Microdata Outputs SPSM Results Tax/Transfer Algorithm Driver Structure The first three functions simulate the Employment Insurance, Old Age Security and Family Introduction and Overview Guide SPSD/M Version 16.1 Page 20