Download Model 2000 Multimeter

2-28
Basic Measurements
MX + B
This math operation lets you manipulate normal display readings (X) mathematically
according to the following calculation:
Y= mX + b
where: X is the normal display reading
m and b are user-entered constants for scale factor and offset
Y is the displayed result
Configuration
To configure the mX+b calculation, perform the following steps:
1.
Press SHIFT then MX+B to display the present scale factor:
M: +1.000000 ^
2.
3.
Enter a value and units prefix. Use the
and
keys to choose a numerical place and
use the ▲ and ▼ keys to increment or decrement the digits.
Press ENTER to confirm the M value and display the B value:
B: +00.00000 m
4.
5.
Enter a value and units prefix.
Press ENTER to confirm the B value and display the UNITS designation:
MXB
6.
Scroll through the letters to change and press ENTER when done.
The Model 2000 then displays the result of the calculation.
Percent
This item selects the percentage calculation and lets you specify a reference value. The
displayed reading will be expressed as a percent deviation from the reference value. The
percentage calculation is performed as follows:
Input - Reference
Percent = ------------------------------------------ × 100%
Reference
where: Input is the normal display reading.
Reference is the user entered constant.
Percent is the displayed result.
Configuration
To configure the percent calculation, perform the following steps:
1.
Press SHIFT then % to display the present value:
REF:+1.000000^