Download Manual - NSGate

14
qBRIDGE-201. Dual E1 access unit / "Drop-Insert" Multiplexer.
User’s manual v.3
Appendix A. Connector pin-outs
qBRIDGE-201. WAN (RJ-45)
Pin
1,2
4,5
3,6
Name
XMT (tip, ring)
RCV (tip, ring)
Chassis
Description
Transmit Data - out
Receive Data - in
Appendix B. Relay module for transparent connection of WAN interfaces
qBRIDGE-201 supports installation of a special relay module for providing
transparent bypass commutation of E1 ports in case of power failure. There is
special slot for installation of this module inside of qBRIDGE-201. User
should remove jumpers from this slot before installing relay module. When
power is applied to the device relay module don’t affect to the device
functioning but if there is power failure relay module shorts WAN interfaces
together providing connection between devices connected to qBRIDGE-201.
Appendix С. Ordering information
P/N: 36BEU201 (qBRIDGE-201)
P/N: 36BED201 (qBRIDGE-201-DC)
P/N: 36BER201 (qBRIDGE-201-R)
100÷240V AC to 9V DC adapter
DC power supply 36 ÷ 72 V
Card for 19" rack 6U
Appendix D. Checking in the box
P/N: 36BEU201 (qBRIDGE-201)
P/N: 36BED201 (qBRIDGE-201-DC)
P/N: 36BER201 (qBRIDGE-201-R)
Power adapter (100÷240V AC to 9V DC)
Cable for DC 36 - 72 power supply connection
Certificate of guarantee
User’s manual
Patch Cord cable “Straight RJ-45” or “Crossover RJ-45”
Relay module for transparent connection of WAN interfaces
NSGate
1 (according to the order)
1 (according to the order)
1 (according to the order)
1 (with qBRIDGE-201 only)
1 (with qBRIDGE-201-DC only)
1
1 for two devices
1
1 (Optional)