Download Chapter 4. Using the Endurance

User manual Endurance
Vials
ERROR 60
ERROR 62
ERROR 64
ERROR 65
ERROR 66
ERROR 67
ERROR 68
ERROR 69
Missing vial. Only available when Skip Missing Vial is set to NO in the
System Settings and during the execution of the Mix of a sample on
48-vial plate.
Missing transport vial.
Missing vial for reagent A.
Missing vial for reagent B.
Missing vial for reagent C.
Missing vial for reagent D.
Missing destination vial.
Not enough transport liquid available due to missing transport
vials.
Electronics
ERROR 71
ERROR 72
ERROR 73
ERROR 75
Flexprint of the sample needle is not connected.
Invalid configuration of the Endurance, PCB missing.
Current limit of the external I/O exceeded.
Error occurred during initialization, the Endurance cannot start.
Plate holder
ERROR 90
ERROR 91
ERROR 92
ERROR 93
Plate home time-out, plate did not reach home position (home
error).
Plate did not reach or leave home position during run.
Plate holder missing.
Dirt on the plate holder.
Plate feeder
ERROR 80
ERROR 81
ERROR 82
ERROR 83
ERROR 94
ERROR 95
ERROR 96
ERROR 97
58
Cannot rotate the grab head while needle is down.
Grab head did not reach home position in time.
Grab head not in home position when needle moving down.
Grab head clamping timing error.
Error grab head position.
Left lift not empty before run
Horizontal or vertical position of grab head not reached in time.
Lift home timeout
0060.183-21
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com