1
Download CGS V4.4.0 User Manual (Issue 2/L)
Transcript
Dok.Nr./Doc. No.: COL–RIBRE–MA–0028 astrium Ausgabe/Issue: Überarbtg./Rev.: Seite/Page: Space Infrastructure 2 L 7–118 Datum/Date: Datum/Date: von /of: 29.02.1996 31.10.2000 7–324 Figure Figure 7–63 shows the definition window for the record data type. Select the field COMP1. This is the default name for the first component. The pop–up menu command rename allows to set a new name for this component. With the command insert component –> preceding or insert component –> succeeding you can add further components before or behind the selected one. The pop–up command delete removes the selected component. With no component selected the pop–up menu provides the commands undo and add component. To change the type of a component select the field in the column Type. Select the data type from the list of predefined types. Note that each component in the record can be of different data type. For more information about data types refer to section 7.4.7.1.37.2. 7.4.7.1.37.2 The AIL data types This section describes the AIL data types used for the implementation of AIL code and the connection between the function blocks. Following informations will be listed: Data Type, the internal representation, the range, further informations i.e. examples if necessary For the detailed Ada specification of all available AIL data types and their available functions refer to chapter 7.4.13. UNSIGNED_BYTE internal representation: range: 8 bit unsigned integer 0 to +255 SIGNED_BYTE internal representation: range: 8 bit unsigned integer –128 to +127 UNSIGNED_SHORT_WORD internal representation: range: 16 bit unsigned integer 0 to +65535 SIGNED_SHORT_WORD internal representation: range: 16 bit unsigned integer –32768 to +32767 UNSIGNED_INTEGER internal representation: range: 32 bit unsigned integer 0 to +4294967295 Copyright per DIN 34
