Download MELSEC-L CPU Module User`s Manual (Built-In

CHAPTER 9 FILE TRANSFER FUNCTION (FTP SERVER)
9.1
Setting for FTP Communication
9
(1) Operation on the CPU module side
Project window  [Parameter]  [PLC Parameter]  [Built-in Ethernet Port Setting]
3.
1.
2.
1.
2.
Set the IP address of the CPU module.
Select "Enable online change (FTP, MC Protocol)" when data need to be written even while the
CPU module is in RUN state.
9.1 Setting for FTP Communication
3.
Configure the FTP settings.
Item
FTP
Description
Select "Use".
Login Name
Set a log-in name used for file transfer (login) request from an external device. The default value is "MELSEC".
Password
Set an FTP password used for file transfer request from an external device. To change the password, enter both the
current password and a new password for confirmation. The default value is "MELSEC".
Command Input
Monitoring Timer
Set a time for monitoring command input performed by the CPU module. When no command is input within the set
period of time, the FTP connection is disconnected. (Setting range: 1 to 32767 ( 500ms))
Set a time value larger than the time required for file transfer.
111