1
Download MELSEC-L CPU Module User`s Manual (Built-In
Transcript
CHAPTER 10 FILE TRANSFER FUNCTION (FTP CLIENT) 10.1 Transferrable Files The following table lists the files that can be transferred using the file transfer function. : Available, : N/A Program Standard Standard SD memory memory RAM ROM card Drive 0 Drive 3 Drive 4 Drive 2 *2 *2 PARAM.QPA Intelligent function module parameter *2 *2 IPARAM.QPA Program *2 ***.QPG*3 Device comment *2 *2 ***.QCD*3 Device initial value *2 *2 ***.QDI*3 File register *2 ***.QDR*3 Local device **.QDL*3 Sampling trace file *2 ***.QTD*3 Programmable controller user data *2 ***.C32*4 File type*1 Parameter Source information File name or extension ***.CSV*3 ***.BIN*3 Qn.DAT DEVSTORE.QST Module error log file *2 IERRLOG.QIE Boot setting file AUTOEXEC.QBT Remote password 00000000.QTM Latch data backup file LCHDAT00.QBK Backup data file MEMBKUP0.QBP Data logging setting file LOGCOM.QLG LOG01.QLG Data logging file ***.CSV*3 Predefined protocol setting file *2 ECPRTCL.QPT, CPRTCL.QPT Menu definition file MENUDEF.QDF Monitor sequence extension MONITOR.Q01 System file for project data batch save/load SVLDINF.QSL Device data file DEVDATA.QDT Sampling trace setting backup file TRCDAT00.QBK Power failure backup for data logging information LOGDAT00.QBK System file for the iQ Sensor Solution function (data backup/restoration) SSBRINF.QSI Backup data file for the iQ Sensor Solution function (data backup/restoration) *5 *3 *4 *5 Up to 4G bytes of data can be transferred in one file. The program memory, standard RAM, and standard ROM files of the CPU module can be transferred only from the FTP client to the FTP server. Any file name can be used. The file names and the number of files stored in source information varies depending on the type and version of the programming tool used in the label program. The file name stored differs depending on the module connected. 129 10.1 Transferrable Files Drive heading Device data storage file *1 *2 10
