Download hytec electronics ltd vtd1612 transient recorder user manual issue 3

VTD 1612A Transient Digitiser User Manual
PIN 11
PIN 12
PIN 13
PIN 14
PIN 15
PIN 16
PIN 17
PIN 18
PIN 19
INPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
/SYSRST
/RESET
/WRVEC
/WRSTATS
/RDMODS
/RDMAMS
/RDMALS
/RDMASK
/RDSTATS
System reset.
System or programmed reset.
Write vector register.
Write status register.
Read module status.
Read MS memory address register.
Read LS memory address register.
Read mask register.
Read status register.
5.3.7 IC108 COMDEC PAL18P8
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8
PIN 9
PIN 11
PIN 12
PIN 13
PIN 14
PIN 15
PIN 16
PIN 17
PIN 18
PIN 19
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
/MESPACE
/TSPACE
/WRMEMO
/WRITS
/ENAVME
VMEREQ
VME CYCLE
/RGSPACE
WRITE
/SYSRST
/WRMEM
/WRTS
/BTOA
/ENDATAB
/VMEMEMA
/ENTSA
/RDTS
/RDMEM
Memory addressed.
Time stamp memory addressed.
Write to memory.
Write to time stamp.
VME cycle enabled.
VME cycle requested.
VME cycle granted.
Register addressed.
VME write cycle.
System reset.
Write to memory (VME or ADC)
Write time stamp (VME or ADC)
Data buffer direction counted.
Enable data onto bus.
Memory addressed by VME.
Enable time stamp address.
Read time stamp.
Read memory.
5.3.8 IC109 WRDEC PAL18P8
PIN 1–4
PIN 5
PIN 6
PIN 7
PIN 8
PIN 9
PIN 11
PIN 12
PIN 13
PIN 14
PIN 15
PIN 16
PIN 17
PIN 18
PIN 19
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
A01–A04
/RGSPACE
VMEREQ
VMECYC
/ENAVME
WRITE
/SYSRST
/WRFPTF
/WRNPTF
/WRPTF
/WRFPTC
/WRNPTC
/WRSEG
/WRMASK
/WRTHRES
VME address bus.
Register addressed.
VME cycle in requested.
VME cycle in progress.
VME cycle enabled.
VME write cycle.
VME system reset.
Write far post–trigger frequency.
Write near post–trigger frequency.
Write pre–trigger frequency.
Write far post–trigger count.
Write near post –rigger count.
Write segment/channel register.
Write mask/control register.
Write threshold register.
CLK8M
PRIORITY OK
IACKIN
DS1
DS0
ADDRESS OK
ENABLEVME
INTREQ
SYSRST
8MHz clock
Interrupt priority OK.
VME interrupt acknowledge.
Data strobe 1
Data strobe 0.
Board addressed correctly.
VME cycle granted.
Interrupt request.
VME system reset.
5.3.9 IC106 VME PLS159
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
PIN 7
PIN 8
PIN 9
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
INPUT
25