Download TopSURV Reference Manual

Monitor
• Start: initiates the sequence of measurements which repeats at
the desired interval.
• Qlock: sends the “Quicklock” or “Turn Around” command which
will cause the Total Station to search for the RC-21.
• Search: make the instrument search for the prism.
• Lock: lock onto the prism or “track” it.
• Turn: opens the Rotate screen which allows the Total station to
turn to various angles or points.
• Stop: makes the total station to stop tracking the prism and go
into “Standby” mode.
The Data Indicator above the Qlock button shows the current state of
the robotic Total Station with one of the following icons:
– no data
– turning
– querying status
– receiving data
The Data tab lists the differences between the coordinates of the
reference point and the measured point.
The Map tab shows all points in graphic mode. For details, on map
properties and customizing, see “Properties” on page 4-8.
1. RC-2 is the Remote Control System 2 for optical communications. For
instructions of how to operate the RC-2 device, consult the instruction
manual for RC-2.
P/N 7010-0492
6-55