1
Download TopSURV Reference Manual
Transcript
Configuration Figure 2-56. Config: Stakeout Parameters • The Store Staked Point As field sets the rule for naming staked points: – Point: sets the rule for defining names for the staked-out points; either design point name, next point name, design point with a pre-defined prefix (that is, stk_01, where “stk_” is the prefix), or design point with a pre-defined suffix. The choice of the prefix or suffix appears only when the corresponding item is chosen from the drop-down menu. Also, a specified numerical constant can be added automatically to generate the staked point name. Figure 2-57. Design Point Name + Constant For instance, if the constant specified is 1000, and the design point is 100, the staked point would be named 1100 (that is, 100+1000). If the design point is alphanumeric, the constant P/N 7010-0492 2-49
