1
Download TopSURV Reference Manual
Transcript
Total Station Survey Multiple backsight points can generate more precise measurements. Figure 6-5. Multi-Point BS • Point: the known point name. Can be selected from the map or from the list. • Code: the known point code. • HR: the height of the rod (target). • Meas: takes the sideshot to the point. • Settings: opens the Mode screen (see “Config: Survey Parameters” on page 2-63. • The bitmap on the upper-left corner displays the following pop-up menu: – Edit Points: opens the Points list (see “Points” on page 3-2). – Inverse: opens the Inverse COGO screen (see “Inverse” on page 9-2). – Notes: opens the Notes screen. – PTL Mode: opens the PTL Mode screen (see “PTL Mode” on page 6-12). – Display Coord: if chosen, the coordinates of the previous point measured will display below the HR data (see Figure 6-9 on page 6-10). – Help: accesses the Help files. The Data tab shows the results of the current measurement and the scale factor and standard deviations of the coordinates. 6-6 TopSURV Reference Manual
