Download here

Step-by-step tour
Step3.vap
Smartphone Server will ring up to 8 times before proceeding to the (N) Box-Exit. If the called party is occupied, Smartphone Server will proceed to the (B) BoxExit.
The Record Box
The program plays a prompt, sends a signal tone and then
takes in up to a 60 second message.
If you use Smartphone Server connected to a PBX system, it is necessary to send a Hookflash to put the caller
on Hold and get the free line. On error, please check your
PBX Manual for the Hookflash time. It can be adjusted in
the [Settings | Telephone Lines] menu of the Smartphone
Server main window.
Step 3: A simple answering
machine system
The application step3.vap is found in
C:\Program Files\Smartphone
Server\Examples\Step3
The Record box is introduced in step 2. This box is also
one of the most important activity boxes, as is the Play
box. The Record box is responsible for the recording of
prompts and messages. It occurs in almost every application, be it a system connection, an information system,
etc. A simple answering machine is prepared by using
this box in step 2.
The Record box offers the standard options of all activity
boxes, which are box identification and greeting. These
have already been explained comprehensively in the
introduction. The further options are divided into two sections: Those for the record settings and those to modify
the files; following is more detail on these tw sections.
Record Settings:
Record, max. [Sec.]: Defines the maximum length of the
recorded file. If the time (in seconds) is surpassed, the
recording is stopped automatically.
Beep Before Recording: A short beep is played before
recording starts.
•
•
•
•
•
25