Download here

Other Settings Dialogs
- Comments User comments (for user information only).
Buttons
Voice Application Settings
Select [Settings | Voice Application Settings] to change
the settings of the current working VAP.
Settings
- Recording Select the type of recording:
•
•
"High Quality" (WAV format). A WAV file has
higher fidelity than a VOX file; however, WAV format is not supported by all Dialogic boards. A WAV
file can be converted to a VOX file (compatible with
Dialogic boards); however, the conversion process
significantly distorts the original recording.
"Low Quality" (VOX format). A VOX file has lower
fidelity than a WAV file, but is supported by all Dialogic boards.
New Click on New to open the Edit Record window and
add a new number or group of numbers (with a user comment) to the Black List.
Edit Click on Edit to open the Edit Record window and
edit a number or group of numbers (and/or the user comment) in the Black List.
Delete Click on Delete to delete the highlighted number
from the Black List.
Close Click on Close to close the Black List Dialog.
% Any phone number starting with a sequence of numbers that matches any entry in the Black List will be disabled. For example, when calling from Switzerland, all
calls to a foreign country begin with “00”. If “00” is specified in the Black List, no calls can be made from Switzerland to any foreign country.
-Dial Out Select Tone Dialing or Pulse Dialing.
- Prompt language Select the language for all System
Prompts. A different language may be selected during
VAP execution by changing the system variable language in Assignment Box.
-Maximum application length Enter the maximum time
(in seconds) for an incoming call (calls are normally
ended by the Hangup Box).
-Accept Pulse Dialing input Select this option if Smart-
Edit Record
Here you can define the settings of the disabled phone
number.
1
Enter the number in the “Disabled number” field. To
disable a group of similar numbers (e.g. all international numbers), enter the prefix of those numbers.
For instance, to disable calling all numbers beginning with “113” enter “113” in the Disabled number
field.
2
Enter any text corresponding the current record of
the Black List in the “Comment” field. For example,
the reason why the number was disabled.
3
Press OK when finished.
phone Server should process pulse dialing signals (in the
Input Box and the Branch Box). You need Dialogic DPD
(Dial Pulse Detection) Enablement Kit or hardware support of DPD installed.
Black List Dialog
Select [Settings | Edit Black List] to disable (prevent outward dialing of) the specified numbers or groups of numbers. Smartphone Server responds to a request to dial a
disabled number as if the call is made but not answered.
Each VAP has its own Black List.
Fields
- Disabled Number The list of all disabled numbers or
Design Area Settings
By default, the Design Area background is a grey grid and
all boxes are aligned to this grid.
groups of numbers.
•
•
•
•
•
99