Download DCP301 Digital Program Controller User`s Manual

Chapter 7. PARAMETER SETUP
No.
Item Code
50
C50
51
C5 1
52
C52
53
C53
54
C54
55
C55
56
C56
57
C57
58
C58
59
C5q
60
C60
61
C6 1
62
C62
63
C63
64
Item
Factory
Setting
Auxiliary output 2
lower limit (4mA)
Auxiliary output 2
lower limit (20mA)
0
External switch
input RSW5
assignment
External switch
input RSW6
assignment
External switch
input RSW7
assignment
0
PARA
1000
0
0
1000
C64
assignment
item 1
PARA
assignment
item 2
PARA
assignment
item 3
PARA
assignment
item 4
PARA
assignment
item 5
PARA
assignment
item 6
PARA
assignment
item 7
PARA
assignment
item 8
Operation completion state
Program time unit
65
C65
Time display
0
66
C66
PV display
0
7-30
1000
1000
1000
1000
1000
1000
User
Setting
Setting
-1999 to 9999U
-199.9 to 999.9%
[Note]
When the auxiliary output type is MV or MFB, the unit is
%. Otherwise, the unit is U.
0: NOP
1: Fast operation
2: PV start
3: NOP
4: AT start/stop
5: NOP
6: Manual/auto operation
7: Cancel G.Soak by OR conditions
8: Cancel G.Soak by AND conditions
9: Direct/reverse action inversion
10 to 20: NOP
[Note]
On external switch 4-input models, “– – – –” is displayed and setting is not displayed.
When the same assignment is set to two or more RSWs,
the RSW setting with the lowest No. is valid.
When this setting is set to NOP, the controller state is
not switched by external switch input ON/OFF. The
controller state can be switched ON/OFF by communications.
1000 to 5000
[Note]
To set the No., add the No. of the item to be assigned
to PARA to the following values for the setting group
containing that item.
• 1000: Constant-value operation data
• 1500: PID parameter
• 2500: Variable parameter
• 3500: Event configuration data
• 4000: Table data
• 4500: Setup data
Assignments to which a nonexistent No. have been set
are invalid.
1000
0
0
0: READY
1: END
0: h/min
1: min/s
2: 0.1s
0: Remaining segment time
1: Total operation time
[Note]
The total operation time returns to 0 in the READY mode.
0: ON
1: OFF
2: ON
3: OFF
[Note]
Settings 0 and 2, and 1 and 3 mean the same, respectively.