Download SimaPro User Manual

Transcript
4 Impact assessment
4.1 Introduction
Most LCA experts do not develop impact assessment methodologies, they
prefer to select one that has been published. In this manual we will not
explain how to develop an impact assessment method, but how to select one,
and if the method allows, how to refine one.
Like in the inventory stage, also in impact assessment the Goal and Scope
definition is the most important source of guidance for the selection of the
method and the impact categories.
The most important choice you make is the desired aggregation level of the
results. This usually depends on the way you would like to address your
audience, and the ability of your audience to understand detailed results.
Figure 2 presents a schematic overview of some of the possibilities.
Figure 2
The choice of the impact assessment method depends largely on the addressed audience.
4.2 ISO on impact assessment methods
In the ISO 14040 standard defines an LCA as a compilation and evaluation
of the inputs and outputs and the potential environmental impacts of a product
system through its life cycle. In this definition, it is clear that impact
assessment is an integral part of LCA.
Life cycle impact assessment is defined as the phase in the LCA aimed at
understanding and evaluating the magnitude and significance of the potential
environmental impacts of a product system.
The impact assessment methods themselves are described in ISO 14042. In this
standard a distinction is made between:
Obligatory elements, such as classification and characterisation
Optional elements, such as normalisation, ranking, grouping and weighting
This means that according to ISO, every LCA must at least include classification
and characterisation. If such procedures are not applied, one may only refer
to the study as a life cycle inventory (LCI)
An important distinction is made between internal and external applications.
If results are intended to compare (competing) products and they are to be
presented to the public, weighting may not be used.
SimaPro 5.1
• 21 •