Download Sinaps User`s Manual

Transcript
Creating Models in Sinaps
Note that when conversions and scaling factors are applied in a table, the plot contained within the table dialog will
reflect the scaled data. If the expression cannot be resolved, perhaps due to the use of processor variables, clicking the
Don’t Plot box on the Basic tab of the table dialog will disable plotting.
5.5.3.2 Additional Text
This tab allows the user to define a traditional text input for a table. The input format for a text table is the standard
SINDA/FLUINT array format less the ID:
dv1, dv2, dv3 ...
dvn-1, dvn
where dv1, dv2, ... are data values contained in that array. Lines may wrap, but avoid any input in column 1. Each text
table is limited to defining a single SINDA/FLUINT array.
This option exists primarily to support migration of older models and reading in text based SINDA/FLUINT files. It
also allows the user to define less common array structures which may not be support by Sinaps Tables such as the trivariate option. When older models (prior to the existence of Sinaps Tables) are opened or a SINDA/FLUINT text file is
read in, all arrays will be migrated as Text structured arrays and the text will be placed on the Additional Input tab. The
user may subsequently convert these text arrays to tables using the Convert Text button on the table form.
5.5.3.3 Table Comment
The Comment tab in the Table edit form may be used to include a description of the table or other documentation such
as references etc. When text based arrays are imported into Sinaps, any comment lines starting with a ‘C’ located
before an array description will be imported into the Comment tab.
Sinaps User’s Manual, C&R Technologies, Inc.
5-127