Download Sinaps User`s Manual
Transcript
Creating Models in Sinaps Note that when conversions and scaling factors are applied in a table, the plot contained within the table dialog will reflect the scaled data. If the expression cannot be resolved, perhaps due to the use of processor variables, clicking the Don’t Plot box on the Basic tab of the table dialog will disable plotting. 5.5.3.2 Additional Text This tab allows the user to define a traditional text input for a table. The input format for a text table is the standard SINDA/FLUINT array format less the ID: dv1, dv2, dv3 ... dvn-1, dvn where dv1, dv2, ... are data values contained in that array. Lines may wrap, but avoid any input in column 1. Each text table is limited to defining a single SINDA/FLUINT array. This option exists primarily to support migration of older models and reading in text based SINDA/FLUINT files. It also allows the user to define less common array structures which may not be support by Sinaps Tables such as the trivariate option. When older models (prior to the existence of Sinaps Tables) are opened or a SINDA/FLUINT text file is read in, all arrays will be migrated as Text structured arrays and the text will be placed on the Additional Input tab. The user may subsequently convert these text arrays to tables using the Convert Text button on the table form. 5.5.3.3 Table Comment The Comment tab in the Table edit form may be used to include a description of the table or other documentation such as references etc. When text based arrays are imported into Sinaps, any comment lines starting with a ‘C’ located before an array description will be imported into the Comment tab. Sinaps User’s Manual, C&R Technologies, Inc. 5-127
Related documents
Submersible 3~ Motor Control Box
AIR TO WATER HEAT PUMP SERVICE MANUAL Versati II
Air-to-Water Heat Pump Service Manual (T1/R410A/50Hz)
PathWare User`s & Reference Guide
Design and Transient Simulation of Vehicle Air Conditioning Systems
epoxy & adhesives - Jamestown Distributors
EPOXY & ADHESIVES - Jamestown Distributors
Joule‐Thomson Cold Finger Design and Analysis
Introduction to FLUINT
Mode d`emploi
LS-DYNA Keyword User`s Manual Version 970 / Update Rev
PIPE-FLO Professional