Download MultiCam® Laser User Manual

MI
71
Innovation. Quality. Performance. Best in Industry. Worldwide.
Correlation
The Correlation Value function is used to establish the pass/fail values for settings that are typically in the range
of 0.2 to 1.0. This function can be utilized if the material to be cut has a fuzzy or indistinct fiducial and the camera
is unable to capture a clear image. If the correlation value is too low or too high, it will be rejected.
1. Press Menu
to access the menu system.
2. Press X-axis Jog Arrows
3. Press Enter
to access the Vision sub-menu.
4. Press X-axis Jog Arrows
5. Press Enter
until Vision is highlighted in blue.
until Correlation is highlighted in blue.
to access the Correlation function.
6. Enter the correlation value using the number keypad (e.g., 0.200).
7. Press Enter
to save the value and return to the Vision sub-menu.
Vision
Menu
Routers * Lasers * Plasma * WaterJets * Knife Cutters
www.MultiCam.com
v. 11 10