Download ODMS (Installation)

INSTALLATION
®
VMS System Requirements
The following hardware and software are required to install
and operate the open data management server software package:
•
A VAX system with at least an Open VMS 6.1 operating system or a DEC Alpha system with at least an Open VMS 6.2
operating system.
•
MOTIF version 1.2 software.
•
Sufficient system memory (16 Mbytes of memory minimum). Contact Elsag Bailey for specific memory requirements.
•
60 Mbtyes of disk space on target disk drive. This does not
include any additional space required for historical data
storage. Contact Elsag Bailey for specific memory requirements.
•
30 Mbytes of free disk space on the system disk. This disk
space is required temporarily. It is used by the installation
process.
If installing and using a remote GCS client the server should
include at least one of the following:
•
DECNET_VAX for Open VMS 6.0.
- or -
•
TCPware for VMS or Open VMS, version 4.0 or higher.
- or -
•
TCP/IP services for VMS or Open VMS, version 2.0B or
higher.
If using TCPware, make sure the USC$IPC.OLB library is in
the SYS$LIBRARY path.
Software is distributed on digital audio (DAT) tape, therefore an
appropriate tape drive is required. Installation of these software packages requires a familiarity with the use of the tape
drive.
It is recommended that the system manager perform any
required adjustments of system setup parameters (SYSGEN). A
knowledge of the VMS operating system is required.
INSTALLATION (OPEN VMS OPERATING SYSTEM)
3-2
WBPEEUI350003B0