Download Wireless Routers

7.Remote settings (Active applications)
Wireless Routers
The following settings could be set as a security feature to only allow connections from certain
hosts and host ports. If you should wish to set this up, enter the remote server name and port
number.
Server
-
This is the hostname or IP address of the remote server to connect
to. For active/fixed applications this field is compulsory. For added
security on passive/follow applications, if configured, it will only
accept connections from the configured address.
TCP Port
-
This is the network port number on the remote server to connect
to. For active/fixed applications this field is compulsory. For added
security on passive/follow applications, if configured, it will only
accept connections from the configured network port.
8.Update Configuration
To complete the setup of your Serial application, click on ‘Update Configuration’. Take note of
the colour change of the ‘Apply Changes’ option in your navigation menu. Your new settings
will only become active once you click ‘Apply Changes’ and then ‘Save and Reboot with new
Settings’
45
Configuration